ZyXEL Communications NBG334S User Manual page 205

802.11g wireless firewall router
Hide thumbs Also See for NBG334S:
Table of Contents

Advertisement

2 Check the hardware connections, and make sure the LEDs are behaving as expected. See
the Quick Start Guide.
3 Make sure your Internet browser does not block pop-up windows and has JavaScripts
and Java enabled. See
4 Make sure your computer is in the same subnet as the NBG334S. (If you know that there
are routers between your computer and the NBG334S, skip this step.)
• If there is a DHCP server on your network, make sure your computer is using a
dynamic IP address. See
• If there is no DHCP server on your network, make sure your computer's IP address is
in the same subnet as the NBG334S. See
5 Reset the device to its factory defaults, and try to access the NBG334S with the default
IP address. See
6 If the problem continues, contact the network administrator or vendor, or try one of the
advanced suggestions.
Advanced Suggestions
• Try to access the NBG334S using another service, such as Telnet. If you can access the
NBG334S, check the remote management settings and firewall rules to find out why the
NBG334S does not respond to HTTP.
• If your computer is connected to the WAN port or is connected wirelessly, use a computer
that is connected to a LAN/ETHERNET port.
I can see the Login screen, but I cannot log in to the NBG334S.
1 Make sure you have entered the password correctly. The default password is 1234. This
field is case-sensitive, so make sure [Caps Lock] is not on.
2 You cannot log in to the web configurator while someone is using Telnet to access the
NBG334S. Log out of the NBG334S in the other session, or ask the person who is
logged in to log out.
3 Disconnect and re-connect the power adaptor or cord to the NBG334S.
4 If this does not work, you have to reset the device to its factory defaults. See
23.4 on page
I cannot Telnet to the NBG334S.
See the troubleshooting suggestions for
configurator.
I cannot use FTP to upload / download the configuration file. / I cannot use
FTP to upload new firmware.
NBG334S User's Guide
Appendix B on page
Section 7.3 on page
Section 7.3 on page
207.
Ignore the suggestions about your browser.
217.
102.
Section 7.3 on page
102.
I cannot see or access the Login screen in the web
Chapter 23 Troubleshooting
102.
Section
205

Advertisement

Table of Contents
loading

Table of Contents