Navigation Panel; Figure 31 Menu: Ap Mode; Table 23 Screens Summary - ZyXEL Communications NBG334S User Manual

Chapter 4 AP Mode
Table 22 Web Configurator Status Screen (continued)
LABEL
Rate
Summary
Any IP Table
Packet Statistics
WLAN Station Status

4.3.1 Navigation Panel

Use the menu in the navigation panel to configure NBG334S features in AP Mode.
The following screen and table show the features you can configure in AP Mode.

Figure 31 Menu: AP Mode

The following table describes the sub-menus.

Table 23 Screens Summary

LINK
Status
Network
Wireless
LAN
64
DESCRIPTION
For the LAN ports, this displays the port speed and duplex setting or N/A when the
line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and N/A when the WLAN is disabled.
Use this screen to view details of IP addresses assigned to devices not in the same
subnet as the NBG334S.
Use this screen to view port status and packet specific statistics.
Use this screen to view the wireless stations that are currently associated to the
NBG334S.
TAB FUNCTION
This screen shows the NBG334S's general device, system and
interface status information. Use this screen to access the wizard,
and summary statistics tables.
General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the NBG334S to block
access to devices or block the devices from accessing the
NBG334S.
Advanced This screen allows you to configure advanced wireless settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service
(WMM QoS). WMM QoS allows you to prioritize wireless traffic
according to the delivery requirements of individual services.
NBG334S User's Guide