Client List Screen; Figure 61 Network > Dhcp Server > Client List - ZyXEL Communications NBG334S User Manual

Table 44 Network > DHCP Server > Advanced
LABEL
First DNS Server
Second DNS
Server
Third DNS Server
Apply
Reset

9.4 Client List Screen

The DHCP table shows current DHCP client information (including IP Address, Host Name
and MAC Address) of all network clients using the NBG334S's DHCP server.
Configure this screen to always assign an IP address to a MAC address (and host name). Click
Network > DHCP Server > Client List.
You can also view a read-only client list by clicking the DHCP Table
(Details...) hyperlink in the Status screen.
The following screen displays.
Figure 61 Network > DHCP Server > Client List
NBG334S User's Guide
DESCRIPTION
Select From ISP if your ISP dynamically assigns DNS server information (and
the NBG334S's WAN IP address). The field to the right displays the (read-only)
DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS
server's IP address in the field to the right. If you chose User-Defined, but leave
the IP address set to 0.0.0.0, User-Defined changes to None after you click
Apply. If you set a second choice to User-Defined, and enter the same IP
address, the second User-Defined changes to None after you click Apply.
Select DNS Relay to have the NBG334S act as a DNS proxy. The NBG334S's
LAN IP address displays in the field to the right (read-only). The NBG334S tells
the DHCP clients on the LAN that the NBG334S itself is the DNS server. When a
computer on the LAN sends a DNS query to the NBG334S, the NBG334S
forwards the query to the NBG334S's system DNS server (configured in the
WAN > Internet Connection screen) and relays the response back to the
computer. You can only select DNS Relay for one of the three servers; if you
select DNS Relay for a second or third DNS server, that choice changes to
None after you click Apply.
Select None if you do not want to configure DNS servers. If you do not configure
a DNS server, you must know the IP address of a computer in order to access it.
Click Apply to save your changes back to the NBG334S.
Click Reset to begin configuring this screen afresh.
Chapter 9 DHCP
111