Configure Your Notebook; Figure 47 Connecting A Wireless Client To A Wireless Network T; Figure 48 Security Settings - ZyXEL Communications NBG334S User Manual

6.3 Configure Your Notebook

We use the ZyXEL M-302 wireless adapter utility screens as an example for
the wireless client. The screens may vary for different models.
1 The NBG334S supports IEEE 802.11b and IEEE 802.11g wireless clients. Make sure
that your notebook or computer's wireless adapter supports one of these standards.
2 Wireless adapters come with software sometimes called a "utility" that you install on
your computer. See your wireless adapter's User's Guide for information on how to do
that.
3 After you've installed the utility, open it. If you cannot see your utility's icon on your
screen, go to Start > Programs and click on your utility in the list of programs that
appears. The utility displays a list of APs within range, as shown in the example screen
below.
4 Select SSID_Example3 and click Connect.

Figure 47 Connecting a Wireless Client to a Wireless Network t

5 Select WPA-PSK and type the security key in the following screen. Click Next.

Figure 48 Security Settings

6 The Confirm Save window appears. Check your settings and click Save to continue.
NBG334S User's Guide
Chapter 6 Wireless Tutorial
91