Table of Contents
Advertisement
Answering Calls
2.8 Caller ID (Automatic Number
Identification)
When installed by system programming, the Caller ID feature allows
you to view incoming call numbers before you answer them.
Incoming call numbers flash in the left half of the LCD. If the name
of the calling party is available it will display in the second half on the
right side of the LCD. If you answer the call, the number appears
steady in the left half of the LCD.
The system also stores numbers that ring on your line but receive no
answer. The system indicates that it has stored ring-no answer
numbers by causing the programmed Caller-ID (CID) light on your
telephone to flash. Pressing the CID button allows you to view the
stored numbers one at a time. Pressing the programmed SAVED
NUMBER REDIAL button causes the system to dial the displayed
number. If the call has been returned by someone else, selecting the T
key reveals who returned the call. Everyone sharing your line can
scroll through the stored numbers and choose which calls to return.
• To scroll through ring-no answer numbers stored on your
system (CID light is flashing),
1. SELECT the CID button on your telephone. Your LCD will display
the calling number, date, and time the call came in. The most recent
call appears first in the list.
2. SELECT the CID button each time you wish to display the next most
recent ring-no answer call to your line.
3. To dial one of the numbers in the redial queue, SELECT the SAVED
NUMBER REDIAL button. The system will automatically dial the
number.
28
Comdiall
June, 03
Advertisement
Table of Contents
