Getting Started
2. SELECT SAVE to end.
NOTE: If you set the ringer to the OFF position, your telephone
sounds a short ring burst once for each call you receive at your
station.
• To set the speaker and
handset loudness levels,
1. PRESS INTERCOM button.
2. PRESS the VOLUME UP or
VOLUME DOWN button once
for each change in speaker vol-
ume that you desire.
3. SELECT SAVE.
4. LIFT handset.
5. PRESS the VOLUME UP or
VOLUME DOWN button once
for each change in handset vol-
ume that you desire.
6. SELECT SAVE.
NOTE:When a call ends, the system resets the speaker and hand-
set volume of all future calls to the programmed setting. For
instructions in setting your speakerphones default volume, see
Volume Control section in the system specific Other Advanced
Features chapter on page 77.
6
Comdiall
June, 03