Table of Contents
Advertisement
Programming
7. Make your speed dial route selection
choice from the list on the LCD by
pressing the appropriate button.
• PRESS line button to select outside
line,
• DIAL 00 to select prime line or last
line used.
• DIAL 01 to 16 to select line
group.
• PRESS INTERCOM button or dial
8 to select intercom.
Note: You may need a pause between numbers to compensate for
differences in response time between your system and the host
system (ask your attendant about this). To store a pause, press
HOLD, then continue dialing. If your system is behind a host sys-
tem that needs a hookflash to access a feature, press TAP to store
a hookflash, then continue dialing.
8. DIAL number (up to 16 digits long,
include * and # if needed).
9. SELECT DONE to store the number.
10. REPEAT previous steps until all
numbers are stored, or SELECT
EXIT.
11. PRESS SPEAKER to end.
68
Comdiall
Selecting Line or Intercom
Dialing a Speed Number
June, 03
Advertisement
Table of Contents
