Table of Contents
Advertisement
Other Advanced Features
• To assume the extension number and programming features
from the new location,
1. CONNECT the telephone line cord to the new jack.
2. OBSERVE the flashing HOLD light and DIAL # while the light is
still flashing (your telephone immediately assumes the features from
the new location).
7.12 Paging
Your system provides an all-call or a zone page feature that you
access by dialing special codes. This arrangement sounds your voice
announcement through the telephone speakers or through an external
paging unit.
• To send a paging announcement,
1. LIFT handset.
2. PRESS INTERCOM.
3. DIAL 70 through 77 for zones 18.
Note: Zone 1 (code 70) provides an all-call function in the
default mode.
4. MAKE announcement.
5. REMAIN on line if awaiting a reply (known as a Meet-Me page), or
HANG UP handset.
At times other telephone users may page you with instructions to
meet them on line. This is known as a Meet-Me page. You can go to
the nearest telephone, dial a code, and be in contact with the paging
party.
• To reply to a Meet-Me page,
1. LIFT handset of nearest telephone.
2. PRESS INTERCOM.
3. DIAL 78.
4. MEET paging party on line.
92
Comdiall
June, 03
Advertisement
Table of Contents
