Caller Id (Automatic Number Identification) - Comdial Impact 8012S Series User Manual

Answering Calls

Caller ID (Automatic Number Identification)

When installed by system programming, the Caller ID feature allows you to view
incoming call numbers before you answer them. Incoming call numbers flash in the
lower half of the LCD. If you answer the call, the number appears in the upper half of
the LCD.
The system also stores numbers that ring on your line but receive no answer. If the
call has been returned by someone else, selecting the S key reveals who returned
the call. Everyone sharing your line can scroll through the stored numbers and
choose which calls to return.
•
To scroll through ring-no answer numbers stored on your
system (CID light is flashing),
1. SELECT the programmed CALLER ID button on your telephone.
Your LCD will display the calling number, date, and time the call
came in. The most recent call appears first in the list.
2. SELECT the programmed CALLER ID button each time you wish
to display the next most recent ring-no answer call to your line.
3. To dial one of the numbers in the redial queue, SELECT the
programmed SAVED NUMBER REDIAL button. The system will
automatically dial the number.
Depending on your system programming, when a call is returned it might remain in
the ring-no answer queue or the system might delete it from the ring-no answer
queue. Your system installer can tell you how the feature is programmed. If the
system is programmed to leave a returned number in the redial queue, the display
will show a "S" next to numbers that have been returned.
•
To determine who viewed the number and returned the call,
1. DIAL
22
*
.
LCD Speakerphone Station User's Guide
GCA70-258