Table of Contents
Advertisement
Other Advanced Features
• To use the automatic redial
feature to redial a busy or
unanswered number,
1. While on the call, SELECT Auto
Redial or PRESS the AUTOMATIC
REDIAL button programmed by
your installer.
2. The system repeatedly dials the
number until you cancel the feature
or the system has dialed the number
a preprogrammed number of times
(determined by your system
installer).
3. The AUTOMATIC REDIAL light flashes between redials and turns
on steady during redialing.
4. IF your installer has enabled answer supervision on your line, the sys-
tem automatically cancels automatic redialing and turns the AUTO-
MATIC REDIAL light off.
5. IF answer supervision is NOT enabled, SELECT Auto Redial or the
programmed AUTOMATIC REDIAL button while on the call to can-
cel automatic redialing,
6. IF your system installer has enabled the redial multiple numbers fea-
ture, you can have up to ten numbers in your redial queue. To add
numbers to your redial queue, REPEAT step 1 in the above procedure.
• To scroll through numbers in your redial queue if your
telephone is currently idle,
1. SELECT Auto Redial or the programmed AUTOMATIC REDIAL
button. The display shows the last number dialed.
2. Choose one of the following:
• SELECT REMOVE to remove the number from the redial queue.
• SELECT NEXT to scroll to the next number in the queue.
• SELECT EXIT to exit from the redial queue.
80
Comdiall
Initiating Auto Redial
June, 03
Advertisement
Table of Contents
