Sip Configuration Menu - Cisco 7970G Administration Manual

Device Configuration Menu

SIP Configuration Menu

SIP General Configuration Menu
Table 4-5 SIP General Configuration Menu Options
Option
Preferred CODEC
Out of Band DTMF
Register with Proxy
Register Expires
Phone Label
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
4-18
The SIP Configuration menu contains these sub-menus:
SIP General Configuration Menu, page 4-18
•
Line Settings Menu, page 4-20
•
The SIP General Configuration menu displays information about the configurable
SIP parameters on the phone.
Description
Displays the CODEC to use when a call is
initiated. This value will always be set to
none.
Displays the configuration of the out-of-band
signaling (for tone detection on the IP side of
a gateway). The Cisco Unified SIP IP phone
supports out-of-band signaling using the AVT
tone method. This value will always be set to
avt.
Displays if the phone must register with a
proxy server during initialization. This value
will always be set to true.
Displays the amount of time, in seconds, after
which a registration request expires.
Displays the text that is displayed on the top
right status line of the LCD on the phone. This
text is for end-user display only and has no
effect on caller identification or messaging.
This value will always be set to null.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-5 describes the options in this menu.
To Change
Display only—cannot
configure.
Display only—cannot
configure.
Display only—cannot
configure.
Use Cisco Unified
CallManager Administration >
Device > Device Settings >
SIP Profile.
Display only—cannot
configure.
OL-11524-01