Overview Of Supported Security Features - Cisco 7970G Administration Manual

Understanding Security Features for Cisco Unified IP Phones
Table 1-2 Cisco Unified IP Phone and Cisco Unified CallManager Security Topics (continued)
Topic
Resetting or restoring the phone
802.1X Authentication for Cisco Unified IP
Phones

Overview of Supported Security Features

Note
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
1-14
This section provides an overview of the security features that the phone supports.
For more information about these features and about Cisco Unified CallManager
and Cisco Unified IP Phone security, refer to the Cisco Unified CallManager
Security Guide.
Also refer to the Cisco Unified CallManager Security Guide to obtain a list of
interactions, restrictions, and limitations for security.
For information about current security settings on a phone, choose Settings >
Security Configuration and choose Settings > Device Configuration >
Security Configuration
Menu" section on page 4-37
page 4-33.
Most security features are available only if a certificate trust list (CTL) is installed
on the phone. For more information about the CTL, refer to Cisco Unified
CallManager Security Guide.
Chapter 1 An Overview of the Cisco Unified IP Phone
Reference
See the "Resetting or Restoring the Cisco Unified
IP Phone" section on page
See these sections:
"Supporting 802.1X Authentication on Cisco
•
Unified IP Phones" section on page 1-18
"802.1X Authentication and Status" section
•
on page 4-42
"Troubleshooting Cisco Unified IP Phone
•
Security" section on page 9-12
.
. For more information, see the
and the "Security Configuration Menu" section on
9-17.
"Security Configuration
OL-11524-01