Cisco 7970G Administration Manual page 62

Overview of Configuring and Installing Cisco Unified IP Phones
Table 1-5 Checklist for Installing the Cisco Unified IP Phone
Task
1. Choose the power source for the phone:
Power over Ethernet (PoE)
–
External power supply
–
2. Assemble the phone, adjust phone
placement, and connect the network
cable.
3. Monitor the Phone Startup Process.
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
1-28
Chapter 1
Purpose
Determines how the phone
receives power.
Locates and installs the phone
in the network.
Verifies that phone is
configured properly.
An Overview of the Cisco Unified IP Phone
For More Information
See the "Providing Power
to the Phone" section on
page 2-4.
See the "Installing the
Cisco Unified IP Phone"
section on page
See the "Adjusting the
Placement of the Cisco
Unified IP Phone" section
on page 3-12.
See the "Verifying the
Phone Startup Process"
section on page
3-9.
3-15.
OL-11524-01