Giving Users Access To The User Options Web Pages; Specifying Options That Appear On The User Options Web Pages - Cisco 7970G Administration Manual

Managing the User Options Web Pages

Giving Users Access to the User Options Web Pages

Specifying Options that Appear on the User Options Web Pages

Note
Step 1
Step 2
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
5-18
Before a user can access the User Options web pages, use Cisco
Unified CallManager Administration to add the user to a standard Cisco Unified
CallManager end user group. To do so, choose User Management > User
Group. You must also associate appropriate phones with the user. To perform
these procedures, from Cisco Unified CallManager Administration, choose
User Management > End User.
For additional information, refer to Cisco Unified CallManager Administration
Guide, "End User Configuration" section.
Most options on the User Options web pages appear by default. However, two
options that do not appear by default are:
Show Ring Settings
•
Show Line Text Label Settings
•
You can control the options that appear on the User Options web pages by using
enterprise parameter settings in Cisco Unified CallManager Administration.
The settings apply to all User Options web pages at your site.
Procedure
From Cisco Unified CallManager Administration, choose System > Enterprise
Parameters.
The Enterprise Parameters Configuration page appears.
In the CCMUser Parameters area, specify whether a parameter appears on the
User Options web pages by choosing one of these values from the Parameter
Value drop-down list for the parameter:
True—Option appears on the User Options web pages (default).
False—Option does not appear on the User Options web pages.
Chapter 5 Configuring Features, Templates, Services, and Users
OL-11524-01