Qos Configuration Menu; Network Configuration - Cisco 7970G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-15 Security Configuration Menu Options (continued)
Option Description
Security Mode Displays the security mode that is set
for the phone.
Logging Display This parameter is used only by Cisco
TAC for troubleshooting.

QoS Configuration Menu

Table 4-16 QoS Configuration Menu Options
Option Description
DSCP For Call DSCP IP classification for call control
Control signaling.
DSCP For DSCP IP classification for any phone
Configuration configuration transfer.
DSCP For DSCP IP classification for phone-based
Services services.

Network Configuration

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
The QoS Configuration menu displays information that relates to quality of
service (QoS) for the phone.
Related Topics
Displaying a Configuration Menu, page 4-3
•
Network Configuration Menu, page 4-7
•
The Network Configuration menu displays device-specific network configuration
.
settings on the phone
To Change
Use Cisco Unified CallManager
Administration to modify.
Display only—Cannot configure.
Table 4-16 describes the options on this menu.
To Change
Use Cisco Unified CallManager
Administration > System > Enterprise
Parameters.
Use Cisco Unified CallManager
Administration > System > Enterprise
Parameters.
Use Cisco Unified CallManager
Administration > System > Enterprise
Parameters.
Table 4-17 describes the options in this menu.
Device Configuration Menu
4-35