Chapter 2
Preparing to Install the Cisco Unified IP Phone on Your Network
Converting an In-Use Phone from SIP to SCCP
Step 1
Step 2
Step 3
Deploying a Phone in an SCCP and SIP Environment
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
To convert a phone that is in use in your network from SIP to SCCP, perform these
steps. For more information, Cisco Unified CallManager Administration Guide.
Procedure
In Cisco Unified CallManager Administration, delete the existing SIP phone from
the Cisco Unified CallManager database.
In Cisco Unified CallManager Administration, create the phone as an SCCP
phone.
Power cycle the phone.
To deploy Cisco Unified IP Phones in an environment that includes SCCP and
SIP and in which the Cisco Unified CallManager Auto-Registration parameter is
SCCP, perform these general steps:
Set the Cisco Unified CallManager auto_registration_protocol parameter to
1.
SCCP.
To do so, from Cisco Unified CallManager Administration, choose System >
Enterprise Parameters.
Install the phones.
2.
Change the auto_registration_protocol parameter to SIP.
3.
Auto-register the SIP phones.
4.
Using Cisco Unified IP Phones with Different Protocols
2-19