Sip Configuration Menu For Sip Phones; Sip General Configuration Menu - Cisco 7975G Software Manual

Administration guide for cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs Also See for 7975G:
Table of Contents

Advertisement

Cisco Unified IP Phone Settings

SIP Configuration Menu for SIP Phones

The SIP Configuration menu is available on SIP phones. This menu contains these submenus:

SIP General Configuration Menu

The SIP General Configuration menu displays information about the configurable SIP parameters on a SIP
phone. The following table describes the options in this menu.
Table 17: SIP General Configuration Menu Options
Option
Preferred CODEC
Out of Band
DTMF
Register with
Proxy
Register Expires
Phone Label
Enable VAD
Start Media Port
Description
Displays the CODEC to use when a call
is initiated. This value will always be set
to none.
Displays the configuration of the
out-of-band signaling (for tone detection
on the IP side of a gateway). The Cisco
Unified IP Phone (SIP) uses the AVT
tone method to support out of band
signaling. This value will always be set
to avt.
This value will always be set to Yes.
Displays the amount of time, in seconds,
after which a registration request expires.
Displays the text that is displayed on the
top right status line of the LCD on the
phone. This text is for end-user display
only and has no effect on caller
identification or messaging. This value
will always be set to null.
This value is set to No by default.
Displays the start Real-Time Transport
Protocol (RTP) range for media.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
SIP Configuration Menu for SIP Phones
To Change
Display only. Cannot configure.
Display only. Cannot configure.
Display only. Cannot configure.
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
Display only. Cannot configure.
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
Communications Manager 9.0 (SCCP and SIP)
87

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7971g-ge7970g7965g7945g

Table of Contents