Cable Specifications
Cable Specifications
Network and Access Port Pinouts
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
D-2
Table D-1
Physical and Operating Specifications (continued)
Specification
Depth
Weight
Power
Cables
Distance Requirements As supported by the Ethernet Specification, it is
RJ-9 jack (4-conductor) for handset and headset connection.
•
RJ-45 jack for the LAN 10/100/1000BaseT connection (labeled
•
10/100/1000 SW).
RJ-45 jack for a second 10/100/1000BaseT compliant connection (labeled
•
10/100/1000 PC).
3.5 mm jack for microphone and speaker connection.
•
•
48-volt power connector.
Although both the network and access ports are used for network connectivity,
they serve different purposes and have different port pinouts.
Value or Range
2.54 in. (6.45 cm)—with footstand fully closed
•
6.0 in. (15.24 cm)—with footstand fully open
•
3.54 in. (9.00 cm)—with optional wall mount kit
•
3.25 lb (1.47 kg)
100-240 VAC, 50-60 Hz, 0.5 A—when using the
•
AC adapter
48 VDC, 0.38 A—when using the in-line power
•
over the network cable
Two (2) pair of Category 3 for 10-Mbps cables
Two (2) pair of Category 5 for 100-Mbps cables
assumed that most Cisco Unified IP Phones should be
within 100m (330 feet) of a phone closet
Appendix D
Technical Specifications
OL-11524-01