Line Settings Menu - Cisco 7970G Administration Manual

Device Configuration Menu
Table 4-5 SIP General Configuration Menu Options (continued)
Option
NAT Address
Call Statistics

Line Settings Menu

Table 4-6 Line Settings Menu Options
Option
Name
Short Name
Authentication Name
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
4-20
Description
Displays the WAN IP address of the NAT or
firewall server. This value will always be set
to null.
Displays if call statistics are enabled on the
phone.
Related Topics
Displaying a Configuration Menu, page 4-3
•
Device Configuration Menu, page 4-15
•
Understanding the SIP Protocol, page 1-8
•
The Line Settings menu displays information that relate to the configurable
parameters for each of the lines on your SIP phone.
options in this menu.
Description
Displays the number the line uses when
registering.
Displays the short name configured for the
line.
Displays the name used by the phone for
authentication if a registration is challenged
by the call control server during
initialization.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Display only—cannot
configure.
Use Cisco Unified
CallManager Administration >
Device > Device Settings >
SIP Profile.
To Change
Use Cisco Unified
CallManager Administration
to modify.
Use Cisco Unified
CallManager Administration
to modify.
Use Cisco Unified
CallManager Administration
to modify.
Table 4-6 describes the
OL-11524-01