Avaya P334T-ML Installation And Configuration Manual page 60

Chapter 8 User Authentication
The following SNMP commands are available.
In order to...
Enable SNMP access to the device
Disable SNMP access to the device
Enable SNMPv1 access to the
device
Disable SNMPv1 access to the
device
Configure the SNMPv3 engine ID
Return the SNMPv3 engine ID to its
default
Create an SNMPv3 user
Remove an SNMPv3 user
Create an SNMPv3 group
Remove an SNMPv3 group
Create a view or add or exclude
OIDs from a view
Delete an SNMPv3 view
Set a read/write/trap SNMPv1
community name
Display a list of SNMPv3 views
Display a table of SNMPv3 users
and the groups with which they are
mapped
Display the SNMPv3 engine ID
Display a list of SNMPv3 groups
Display a list of SNMPv3 users
Display a list of SNMPv3
notification receivers and SNMPv1
trap receivers
44
Use the following command...
snmp-server enable
no snmp-server
snmp-server community
no snmp-server community
snmp-server engineID
no snmp-server engineID
snmp-server user
no snmp-server user
snmp-server group
no snmp-server group
snmp-server view
no snmp-server view
set snmp community
show snmp view
show snmp userToGroup
show snmp engineID
show snmp group
show snmp user
show snmp
Avaya P334T-ML User's Guide