Introduction; Snmp Support; Introduction To Snmp; Snmp Versions - Avaya P334T-ML Installation And Configuration Manual

Chapter 8
User Authentication

Introduction

A secure system provides safeguards to insure that only authorized personnel can
perform configuration procedures. In Avaya P330, these safeguards form part of the
CLI architecture and control remote access via SNMP, Telnet, and SSH. In addition,
you can block any of the IP protocols supported by the P330.

SNMP Support

Introduction to SNMP

SNMP Versions

There are currently three versions of (Simple Network Management Protocol)
SNMP:
• SNMPv1
• SNMPv2c
• SNMPv3
The P330 supports device access using all three versions of SNMP.

Managers and Agents

SNMP uses software entities called managers and agents to manage network
devices. The manager monitors and controls all other SNMP-managed devices or
network nodes on the network. There must be at least one SNMP Manager in a
managed network. The manager is installed on a workstation located on the
network.
An agent resides in a managed device or network node. The agent receives
instructions from the SNMP Manager, generates reports in response to requests
from the SNMP Manager, and also sends management information back to the
SNMP Manager as events occur. Every P330 module has an agent. However, on
each P330 stack, one module is selected to be the master module. The stack is
managed via the master module's agent.
There are many SNMP management applications, but all these applications perform
the same basic task. They allow SNMP managers to communicate with agents to
configure, get statistics and information, and receive alerts from network devices.
You can use any SNMP-compatible network management system to monitor and
Avaya P334T-ML User's Guide 39