Defining New Local Users; Exiting The Supervisor Level; Entering The Cli - Avaya P334T-ML Installation And Configuration Manual

Chapter 7 Establishing Switch Access

Defining new local users

Define new users and access levels using the following command in Supervisor
Level:
In order to...
Add a local user account and
configure a user (name, password
and access level)
To remove a local user account
Display the username, password
and access type for all users on the
switch

Exiting the Supervisor Level

To exit the Supervisor level, type the command exit.

Entering the CLI

To enter the CLI, enter your username and password. Your access level is indicated
in the prompt as follows:
The User level prompt is shown below:
Cajun_P330-N>
The Privileged level prompt is shown below:
Cajun_P330-N#
The Configure level prompt for Layer 3 configuration is shown below:
P330-N(configure)#
The Supervisor level prompt is shown below:
Cajun_P330-N(super)#
38
Use the following command...
username
no username
show username
Avaya P334T-ML User's Guide