Add Printing System Wizard; Adding The Printing Systems Using Standard Mode - Kyocera KM-NET Operation Manual

Add Printing System Wizard

4. Add Printing System Wizard

4.1. Adding the Printing Systems Using Standard Mode

10
To search for printing systems to be registered, click Add
System Wizard starts.
To add the printing systems using standard mode, perform the following procedure.
1
Select Standard.
2
Select the check box for Network or Local connection according to the desired
printing system.
3
Click Next.
4
Perform the instructions displayed by the wizard. The instructions are different
depending on the connection type selected above.
. The Add Printing
KM-NET for Clients