[3D Eyewear Brightness]; [3D Ir Transmitter] - Panasonic PT-AE8000U Operating Instructions Manual

[3D SETTINGS] menu

[3D EYEWEAR BRIGHTNESS]

This enables adjusting the brightness for the 3D
Eyewear.
Switch settings
[LIGHT]
[LIGHT] Select to brighten the 3D video display.
[NORMAL] Select this as standard for 3D viewing
[DARK] Select to reduce 3D video afterimage.
Note
z When you switch the brightness of 3D Eyewear, the
screen may momentarily appear jumbled.
70 - ENGLISH
Switch settings
[DARK]
[NORMAL]

[3D IR TRANSMITTER]

This controls the 3D IR Transmitter embedded in this
projector.
Switch settings
[OFF]
[STRONG]
This sets the IR output of the 3D IR
[STRONG] Transmitter to high.
Select this when viewing 3D video.
This sets the IR output of the 3D IR
Transmitter to middle. Select this when
[MEDIUM]
the response of the remote control of
the projector or the external device is
poor.
This sets the IR output of the 3D IR
Transmitter to low.
[WEAK] Select this when the response of the
remote control is poor even when set
to [MEDIUM].
This sets the IR output of the 3D IR
[OFF] Transmitter to off.
Select this when not viewing 3D video.
Note
z If you feel that the response of the remote control for
this projector or external devices is poor when using the
built-in 3D IR Transmitter, first set to [MEDIUM]. If no
improvements are seen, set to [WEAK].
z This menu cannot be used to control the external 3D IR
transmitter (optional accessory).
Switch settings
[WEAK]
[MEDIUM]