[Trigger 1/2 Setting] - Panasonic PT-AE8000U Operating Instructions Manual

[TRIGGER 1/2 SETTING]

You can set the function for each trigger terminal.
The trigger terminals for this projector are used as
both the input/output terminal for the trigger function
and the output terminal for the external 3D IR
Transmitter (optional accessory). This is selected with
a menu.
Attention
z You can connect a maximum of two external 3D IR
Transmitter (optional accessory).
z Make sure the <MAIN POWER> switch of the projector
is turned <OFF> before a cable is connected to or
disconnected from a trigger terminal.
■ [OUTPUT]
In conjunction with projector operation set in the [TRIGGER
1 SETTING]/[TRIGGER 2 SETTING] menu, a trigger
output signal is sent to an external device with a trigger
terminal to enable control.
■ [INPUT]
Receipt of a trigger input signal from an external device
enables control of projector operation setup in the
[TRIGGER 1 SETTING]/[TRIGGER 2 SETTING] menu.
ON-SCREEN DISPLAY
BACK COLOR
PICTURE
STARTUP LOGO
POSITION AUTO SEARCH
HDMI SIGNAL LEVEL
FRAME RESPONSE
LANGUAGE
PROJECTION METHOD
3D SETTINGS TRIGGER 1 SETTING
TRIGGER 2 SETTING
SLEEP
LENS CONTROL
HIGH ALTITUDE MODE
LAMP POWER
OPTION
FUNCTION BUTTON
VIERA LINK SETTINGS
1) Use the ▲▼ buttons to select [TRIGGER
1 SETTING] or [TRIGGER 2 SETTING] and
press the <ENTER> button.
z The [TRIGGER SETTING] menu is displayed.
TRIGGER 1 SETTING
PICTURE OFF
OUTPUT
POSITION POWER ON
SELECT LENS MEMORY 1
LANGUAGE SELECT LENS MEMORY 2
SELECT LENS MEMORY 3
SELECT LENS MEMORY 4
3D SETTINGS
SELECT LENS MEMORY 5
SELECT LENS MEMORY 6
LENS CONTROL
BLANK
DELAY TIME
OPTION
INPUT
POWER ON/OFF
2)
Note
z Read the operating instructions for the external 3D IR
Transmitter (optional accessory) when using a 3D IR
Transmitter.
1/2
BLUE
ON
ON
NORMAL
NORMAL
FRONT/DESK
OFF
OFF
OFF
OFF
NORMAL
3D SHUTTER OUT
When the item which is set in the [TRIGGER
1 SETTING]/[TRIGGER 2 SETTING] menu is
SELECT 4:3 ASPECT
SELECT 16:9 ASPECT
chosen or executed in the projector, 12 V is output
SELECT S16:9 ASPECT
from a trigger terminal.
SELECT JUST ASPECT
SELECT ZOOM ASPECT
Note
SELECT H-FIT ASPECT
SELECT V-FIT ASPECT
z When [AUTO] is selected in the [ASPECT] menu of
RS-232C COMMAND LINK
[POSITION], video is automatically displayed using either
0 SEC.
4:3 or 16:9 aspect ratio depending on the input signal,
BLANK
so if this aspect ratio matches the settings made in
[TRIGGER 1 SETTINGS] or [TRIGGER 2 SETTINGS]
12 V is output.
[OPTION] menu
Press the ▲▼◄► buttons to select
the input/output function and press the
<ENTER> button.
z Function settings
Unable to transmit the
trigger output signal. Does
not function even if trigger
input signal is received.
(Trigger input signal can
[OFF] be received.)
An external 3D IR
Transmitter (optional
accessory) will not
operate even if
connected.
Select this for connecting
[3D SHUTTER and use of an external 3D
OUT] IR Transmitter (optional
accessory).
z Output
[SELECT 4:3
[POWER ON]
ASPECT]
[SELECT LENS [SELECT 16:9
MEMORY 1] ASPECT]
[SELECT LENS [SELECT S16:9
MEMORY 2] ASPECT]
[SELECT LENS [SELECT JUST
MEMORY 3] ASPECT]
[SELECT LENS [SELECT ZOOM
MEMORY 4] ASPECT]
[SELECT LENS [SELECT H-FIT
MEMORY 5] ASPECT]
[SELECT LENS [SELECT V-FIT
MEMORY 6] ASPECT]
[RS-232C COMMAND
[BLANK]
LINK]
ENGLISH - 79