Panasonic PT-AE8000U Operating Instructions Manual page 57

■ [CINEMA REALITY]
You can switch the automatic image synchronizer on/off for
24 frames a second images, such as movies.
Switch settings
[ON] Cinema reality active
[OFF] Cinema reality inactive
Note
z [CINEMA REALITY] is effective only with interlace
signals.
■ [SUPER WHITE]
Intensity information for higher than 100% intensity that
is included in the image information is replicated. When it
appears that bright whites, such as the clouds or a white
T-shirt at a beach in the middle of the summer, are blurred
out without any contrast, set this function to [ON] to prevent
white peak.
Switch settings
[ON] Super white enabled.
[OFF] Super white disabled.
Note
z This function is disabled under the following conditions:
- When [SPLIT ADJUST] is used for adjustment
- For other than HDMI1, HDMI2, and HDMI3 input
- When the [HDMI SIGNAL LEVEL] is set to [EXPAND]
■ [TV-SYSTEM]
Switch settings
Switch settings
The settings change as follows each time the button
is pressed.
Attention
z Set this to [AUTO] under normal conditions.
Switch settings
z Switch the settings to the respective TV signal formats.
Note
z Setting [AUTO] will automatically select NTSC,
[PICTURE] menu
[Only during VIDEO or S-VIDEO signal input]
The projector automatically detects the input signal but if
an unstable signal is input, set the system manually. Set
with a system format that matches the input signal.
[AUTO]
[SECAM]
[PAL-N]
[PAL-M]
NTSC4.43, PAL, PAL-M, PAL-N, SECAM, or PAL60.
Switch settings
[NTSC]
[NTSC4.43]
[PAL]
ENGLISH - 57