Panasonic PT-AE8000U Operating Instructions Manual page 56

[PICTURE] menu
●Changing a profile name
1) Press the ▲▼ buttons to select [PROFILE
NAME CHANGE] and press the <ENTER>
button.
z The [PROFILE NAME CHANGE] menu is
displayed.
PICTURE
POSITION
LANGUAGE
3D SETTINGS
2) Press the ▲▼ buttons to select the
LENS CONTROL
profile name to be changed and press the
OPTION
<ENTER> button.
z The [PROFILE NAME INPUT] screen is
displayed.
PROFILE NAME INPUT
SCENE1
A B C D
N O P Q
a b c d
n o p q
1 2 3 4
! " # $
~
_ ` |
3) Press the ▲▼◄► buttons to specify the
location of the required character and
press the <ENTER> button.
z You can enter up to 14 characters.
z Select [ALL DELETE] and press the <ENTER>
button to erase all input text. If you press the
<DEFAULT> button on the remote control, you
can erase the character currently selected by
the cursor in the input box.
4) Press the ▲▼◄► buttons to select [OK].
5) Press the <ENTER> button.
Note
z Press the <ENTER> button without entering any text to
keep the default name ([USER1] - [USER6]).
56 - ENGLISH
PROFILE NAME CHANGE
USER1
USER2
USER3
USER4
USER5
USER6
E F G H I J K L M ALL DELETE
R S T U V W X Y Z
e f g h i j k l m
r s t u v w x y z
SPACE
5 6 7 8 9 0
% & ' + - / = ? @ \ ^
＊
( ) < > [ ] { } , . : ;
OK CANCEL
●Loading saved profiles
Select a saved profile (color adjustment result). The
adjustment values set in the profile are applied to the
[PICTURE MODE] menu and recorded.
1) Press the ▲▼ buttons to select [PROFILE].
2) Use the buttons to switch the profile.
[NORMAL]
[USER6]
[USER5]
[NORMAL] Default setting.
[USER1] -
Displayed when profile is saved.
[USER6]
Note
z Profiles that are not saved are not displayed as selection
options.
■ [x.v.Color]
You can switch on/off the automatic adjustment system for
signals which comply with HDMI standard (x.v.Ycc).
Switch settings
[ON] Active
[OFF] Inactive
Note
z This function is only available when a signal supporting
HDMI standards (x.v.Ycc) is input via an HDMI input
terminal and [PICTURE MODE] is set to [REC709].
■ [DETAIL CLARITY]
You can adjust the detail clarity system levels.
Reduce the
effect
z Setting range: 0 to +7
[USER1]
[USER2]
[USER3]
[USER4]
Switch settings
Strengthen the
effect