[Picture] Menu; [Picture Mode]; [Contrast]; [Brightness] - Panasonic PT-AE8000U Operating Instructions Manual

[PICTURE] menu

[PICTURE] menu
Select [PICTURE] from the main menu of
"Navigating through the menu" (
and choose an item from the submenu.
z After selecting an item, adjust the image with the
buttons.
Remote control

[PICTURE MODE]

You can use these preset parameter settings to
optimize image projection according to image source
or projection environment.
Switch settings
The settings change as follows each time the button
is pressed.
[NORMAL]
[GAME] [CINEMA2]
For a general image such as sports
[NORMAL]
program.
For viewing at high brightness and
[DYNAMIC]
sharpness.
For HDTV standard (ITU-R BT.
709) color temperature 6 500 K at
[REC709]
the default setting of the [PICTURE]
menu items.
For D-CINEMA standard (SMPTE
RP431-2) color temperature
[D-CINEMA]
6 300 K at the default setting of the
[PICTURE] menu items.
Tuned by top Hollywood colorists
[CINEMA1] for watching a movie with smooth
image quality.
For viewing action films and anime
[CINEMA2] etc. with vivid color and sharp
quality.
[GAME] For use with games.
Note
z It may take a few seconds for the picture to stabilize after
a picture mode change.
40 - ENGLISH
 page 37),
Projector controls
Switch settings
[DYNAMIC] [REC709]
[CINEMA1] [D-CINEMA]

[CONTRAST]

You can adjust the contrast of the colors.
Lower
z Setting range: -64 to +64
Attention
z Adjust the [BRIGHTNESS] in advance if necessary.

[BRIGHTNESS]

You can adjust the dark (black) part of the projected
image.
Darker
z Setting range: −32 to +32

[COLOR]

You can adjust the color saturation of the projected
image.
Lighter
z Setting range: −32 to +32
Note
z When COMPUTER signal is input, only movie based
signals can be adjusted.
z Movie based signals are 480i, 576i, 480p, 576p, 720/60p,
720/50p, 1 080/60i, 1 080/50i, 1 080/60p, 1 080/50p and
1 080/24p.

[TINT]

You can adjust the skin tone in the projected image.
Less greenish
z Setting range: −32 to +32
Note
z When COMPUTER signal is input, only movie based
signals can be adjusted.
z Movie based signals are 480i, 576i, 480p, 576p, 720/60p,
720/50p, 1 080/60i, 1 080/50i, 1 080/60p, 1 080/50p and
1 080/24p.
Higher
Brighter
Darker
Less reddish