[3D Settings] Menu; [Screen Size]; [3D Input Format] - Panasonic PT-AE8000U Operating Instructions Manual

[3D SETTINGS] menu

[3D SETTINGS] menu
Either press the <3D> button on the remote
control or select [3D SETTINGS] from the
main menu in "Navigating through the menu"
(  page 37) and select the item from a submenu.
z After selecting an item, adjust the screen position
using the ▲▼◄ ► buttons.
Remote control

[SCREEN SIZE]

When viewing 3D video, set the screen size for
projection.
[102 cm (40 inches)]
[508 cm (200 inches)]
[457 cm (180 inches)]
[406 cm (160 inches)]
[356 cm (140 inches)]
Switch settings
Note
z In the case that the actual projection screen size and
the menu size do not match, select a screen size that is
slightly larger than the actual screen size.
z If [AUTO SWITCHING] in the [LENS CONTROL] menu is
set to [2.35:1 IMAGE DETECTION], set the size to 1.02 m
(40") larger than the actual screen used for projection.
64 - ENGLISH
Projector controls
[152 cm (60 inches)]
[203 cm (80 inches)]
[254 cm (100 inches)]
[305 cm (120 inches)]
Switch settings

[3D INPUT FORMAT]

In the case that 3D video is not displayed in 3D
correctly, set the 3D format of the projector to the
same one as the connected player. When 3D video is
not displayed correctly using [AUTO], set to [SIDE BY
SIDE] or [TOP AND BOTTOM] in accordance with the
3D video format.
1) Press the <ENTER> button.
z The [3D INPUT FORMAT] menu is displayed.
3D INPUT FORMAT
PICTURE AUTO
SIDE BY SIDE
TOP AND BOTTOM
POSITION
NATIVE
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
2) Select the 3D format with the ▲ ▼
buttons.
3) Press the <ENTER> button.
[AUTO]
[SIDE BY SIDE]
[TOP AND BOTTOM]
[NATIVE]
When a 3D video
signal is received, it
automatically changes to
display of 3D video.
Uses [SIDE BY SIDE]
(two screen configuration
on each side) format for
3D video display.
Uses [TOP AND
BOTTOM] (two screen
configuration on top and
bottom) format for 3D
video display.
Displays 3D video as 2D
video.