Specifying Only One Destination; Specifying From Registered Destination - Konica Minolta bizhub C650 User Manual

Transmission
2.6

Specifying only one destination

Only one destination can be specified in network fax in the following ways.
-

Specifying from registered destination

- Specifying by direct input
- Specifying from the program destination
!
Detail
For details on the method of specifying form registered destination, refer to "Specifying from registered
destination" on page 2-17.
Refer to "Specifying by direct input" on page 2-21 for the method to specify by direct input.
Refer to "Send a fax with Program destination" on page 2-28 for the method to specify from the
program.
Specifying from registered destination
When the Address Book is registered, specification can be done by searching from registered search text.
% Touch the desired destination button in displayed [Address Book] tab.
– When desired destination button is not displayed, it can be searched by the following methods.
Touch search text button
Searching by destination type
Enter the details and search
– Re-select the destination to be cancelled to cancel the selected destination.
– If [Reset] key is pressed, the selected destination and the settings are cleared.
– For details on registered destination, refer to the "Registering the Address Book" on page 8-3.
– Refer to the "Searching the registered destination (Search text button)" on page 2-18 for the method
of searching the registered destination by touching search character button.
– For details on method of searching by destination type, refer to the "Searching the registered
destination (Address Type)" on page 2-19.
– For details on searching after entering the details, refer to the "Searching the registered destination
(Detail Search)" on page 2-20.
The destination is specified.
C650
2
2-17