Setting Initial Value Of E-Mail Text - Konica Minolta bizhub C650 User Manual

Registering/Settings
8
Touch [Close].
– Returns to procedure 4 when the change of text is continued.
9
Touch [Close] until it returns to Fax/Scan screen.

Setting initial value of E-mail text

Here, the text set as initial value is used by internet fax transmission. The following procedure describes how
to set initial value of E-mail text.
1
Display Create One-Touch Destination screen.
– For details on display methods of Create One-Touch Destination screen, refer to "Displaying the fax
registration screen" on page 8-2.
2
Touch [E-Mail Settings].
– In the Utility mode, numbers displayed on buttons can be entered and selected with the keypad. For
[E-Mail Settings], enter [4] with the keypad.
3
Touch [E-mail Body].
4
Select the E-mail Body to be set in initial value and then touch [Set as Default].
Touch [↓] or [↑] to go to next or previous page.
–
C650
8
8-33