Reserving The Transmission - Konica Minolta bizhub C650 User Manual

Transmission
2.12

Reserving the transmission

A function for queuing the next transmission while printing or during transmission.
This function is called reserved transmission.
1
Touch [Next Scan/Fax Job].
– Unless [TX Display] or [RX Display] is not set to [Yes], the [Next Scan/Fax Job] is not displayed.
– For details on [TX Display], refer to "Setting the screen during fax operation (FAX Active Screen)" on
page 9-15.
For details on [Copy Operating Screen], refer to User's Guide [Copy Operations].
2
Load the original.
– Refer to "Loading the original" on page 2-9 for details
on positioning the original.
3
Specify the functions if required.
– For details on Scan Settings, refer to "Specifying the scan conditions" on page 2-14 and "Scan
Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on page 6-3.
– For details on Communication Settings, refer to "Communication Settings" on page 6-4.
4
Specify the destination.
5
Press [Start] key.
!
Detail
When the reserved transmission is to be cancelled, touch [Job List] and then touch [Delete].
C650
2
2-37