Specifying Only One Destination; Specifying From Registered Destinations - Konica Minolta bizhub C650 User Manual

To send a fax
2.4

Specifying only one destination

The following methods are possible for specifying one destination only.
-

Specifying from registered destinations

- Specifying by direct input
- Specifying from job history
- Specifying from program destinations
!
Detail
Refer to "Specifying from registered destinations" on page 2-13 regarding methods for specifying from
the registered destinations.
Refer to "Specifying by direct input" on page 2-17 regarding methods for specifying by direct input.
Refer to "Specifying from the job history" on page 2-18 regarding methods for specifying from the job
history.
Refer to "Sending a fax using a program destination" on page 2-24 regarding methods for specifying
from the program destinations.
Specifying from registered destinations
When an Address Book has been registered, you can search for the destination by the registered search word
and dial the destination.
!
Detail
Refer to "Registering the Address Book" on page 9-3 for registering destinations.
Refer to "Searching for a registered destination (Index button)" on page 2-14 regarding registered
destination search methods used by touching the Index button.
Refer to "Searching for a registered destination (Address Type)" on page 2-14 regarding searching by
destination type.
Refer to "Searching for registered destinations (Detail Search)" on page 2-15 regarding entering details
to conduct searches.
% Touch the desired destination button displayed in the [Address Book] tab.
– To cancel a selected destination, re-select the destination you wish to cancel.
– If [Reset] key is pressed, the selected address and the settings are cleared.
– When desired destination button is not displayed, it can be searched for using the following
methods.
Touch the Index button
Search by destination type
Enter the details and search
The destination is specified.
C650
2
2-13