Konica Minolta bizhub C650 User Manual page 63

Transmission
– The destination of the direct input can be registered by touching the [Store Address]. For details,
refer to "Registering the Address Book" on page 8-3.
– [Check Scanning Settings]: The scanning settings can be checked. If each setting on the screen is
touched, the corresponding scanning setting screen is displayed and setting can be changed.
Touch [Forward →] to display the next screen and touch [← Back] to display the previous screen.
–
– For details on scan settings, refer to "Specifying the scan conditions" on page 2-14 and "Scan
Settings" on page 6-2.
– [Check Original Settings]: The original settings can be checked. If each setting on the screen is
touched, the corresponding original setting screen is displayed and setting can be changed.
– For details on original setting, refer to the "Original Settings" on page 6-3.
– [Communication Settings]: The fax transmission source settings can be checked. If [Fax Header
Settings] on the screen is touched, the communication settings screen is displayed and the settings
can be changed.
Touch [Forward →] to display the next screen and touch [← Back] to display the previous screen.
–
– In internet fax, IP address fax, settings other than [Fax Header Settings] are not used.
C650
2
2-31