Continuous Af; Iso (Sensitivity) - FujiFilm FinePix S100 Owner's Manual

Continuous AF

Use this button to take pictures of a moving subject. Using Continuous AF mode reduces the time required for focusing.
Available Shooting modes: All except
A Set the Focus mode selector switch to C-AF.
B Frame the shot so that the subject fills the entire AF
frame. The camera continues to focus on the main
subject in the AF frame.
2000 2000
70
ISO 400 ISO 400
F2.8 F2.8
C Press the shutter button down halfway to focus on the
subject, and then press it down fully to take the picture.
Double
beep
Halfway pressed
Continuous AF can be used with
Detection.
CAUTION
• Because the camera focuses continuously without
pressing the shutter button, note the following:
- Watch the battery level carefully since the camera
consumes more power in this mode than in other
Focus modes (S-AF and MF).
- If the [ AUTO POWER OFF] function is set to
[OFF], particular attention must be given to the
battery level.
• When Continuous AF is set, [H AF MODE] of Shooting
mode is automatically set to [
Click
Fully pressed
Intelligent Face
CENTER].