Matters
Problems
Cannot set
Intelligent Face
Intelligent Face
Detection
Detection.
Cannot set the
Macro
camera to Macro
(close-up) mode.
Cannot use the
flash.
Flash
The flash settings
are restricted and
cannot be
selected.
The playback
image is dark
even though the
flash was used.
Possible causes
Shooting mode is set to ,,
., or
.
Shooting mode is set to anything other
than B,
, N, M, <, or
,
,
>.
The shutter button was pressed while the
flash was charging.
The flash is not popped up.
Shooting mode is set to ,,
or
.
The battery has run out.
Continuous shooting is selected.
> Super macro mode is selected.
Shooting mode is set to anything other
than H,
, or N.
,
The subject is too far away.
Your finger was covering the flash.
Solutions
,
,
,
Change Shooting mode.
Change Shooting mode.
Wait until the charging is completed before
pressing the shutter button.
Pop up the flash.
,
,
,
Change Shooting mode.
Load new or fully charged battery.
Set continuous shooting to [OFF].
Cancel > Super macro mode.
The flash settings are restricted because
the camera settings are tailored to the
scene being shot. Change Shooting mode
for a wider range of flash settings.
Move to within the effective flash range
before taking the picture.
Hold the camera correctly.
Page
55
55
78
76
55
18, 19
81
75
55, 77
75, 78
33
Continued Q
159