Aperture Priority Ae; Aperture-Priority Ae - FujiFilm FinePix S100 Owner's Manual

Setting Shooting Mode
< Aperture Priority AE
This is an automatic mode to set the aperture.
Use this mode to have the area in front of and behind the
subject out of focus (large aperture) or have both near
and far subjects in focus (small aperture).
CHECK
• See p.54 for the available settings of Shooting mode.
• See p.77-78 for information on the available flash
modes.
Z Setting the aperture
2000 2000
F2.8 F2.8
A Rotate the command dial to select the
B Press the shutter button to take
62
ISO 400 ISO 400
Aperture
aperture.
pictures.
CHECK
Aperture settings
Wide-angle: F2.8 to F8 in 1/3 EV increments
Telephoto: F5.3 to F8 in 1/3 EV increments
CAUTION
ISO ISO 400 400
4" 4"
4" 4"
F8 F8
Lit red
When the correct exposure cannot be obtained with
selected aperture setting, the shutter speed appears in
red. When this occurs, adjust the aperture setting again.
When d [FORCED FLASH] is set, you can take a picture
with a shutter speed of up to 1/45 sec.
When the brightness of the
subject is outside the camera's
ISO ISO 400 400
brightness metering range,
[----] appears as the shutter
speed.
- - - - - - - -
4 F8 F8
The shutter speed will not appear until you press the
shutter button down halfway when [
RANGE] is set to [AUTO].
DYNAMIC