FujiFilm FinePix S100 Owner's Manual page 155

Warning Displayed
[CAN NOT SET DPOF] An attempt was made to specify DPOF settings for a
movie or an image that is not supported by DPOF.
[~ CAN NOT SET
DPOF]
[r CAN NOT SET
DPOF]
[CAN NOT ROTATE] An attempt was made to rotate a movie or an image
shot using a camera other than FinePix S100FS.
[r CAN NOT ROTATE]
[CANNOT DETECT] An attempt was made to correct the red-eye effect in
images taken with Intelligent Face Detection function
[ CAANOT DETECT] set to OFF, movies, images taken by another
camera, or images not allowing red-eye removal.
[r CANNOT DETECT]
[ CANNOT DETECT]
An attempt was made to the correct red-eye effect in
[~ RAW FILE]
an image shot in the CCD-RAW setting.
[COMMUNICATION The camera is not connected to a PC or printer.
ERROR]
Displayed for PictBridge.
[PRINTER ERROR]
Displayed for PictBridge.
[PRINTER ERROR
RESUME?]
Explanation Remedy
DPOF printing cannot be used with this image
format.
These images cannot be rotated by image formats.
Red-eye removal cannot be used with these image
formats.
Red-eye removal cannot be used with this image
format.
• Check that the USB cable is connected correctly.
• Check that your printer is turned on.
• Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
Continued Q
155