M Shutter Priority Ae; M Shutter-Priority Ae - FujiFilm FinePix S100 Owner's Manual

Setting Shooting Mode
B Press the shutter button to take
MEMO
• Program shift can be used when Suppressed flash
(➝p.77) is set in flash mode.
• The shutter speed and aperture setting appear in yellow
when the camera is in Program shift mode.
• Any of following cancels Program shift:
- Changing the Mode dial setting
- Setting the camera to Playback mode
- Turning the camera off
- Popping the flash up
CAUTION
ISO ISO 400
Program shift cannot be used when [
RANGE] is set to [AUTO], and [S ISO] is set to
[AUTO(400)], [AUTO(800)] or [AUTO(1600)].
60
pictures.
When the brightness of the
subject is outside the camera's
400
brightness metering range, [---]
appears as the shutter speed and
aperture setting on the screen.
DYNAMIC

M Shutter Priority AE

This is an automatic mode to set the shutter speed.
Use this mode to freeze a moving subject (fast shutter
speed) or convey the impression of movement (slow
shutter speed).
CHECK
• See p.54 for the available settings of Shooting mode.
• See p.77-78 for information on the available flash
modes.
Z Setting the shutter speed
2000 2000 F2.8 F2.8
A Rotate the command dial to select the
shutter speed.
B Press the shutter button to take
pictures.
ISO 400 ISO 400
Shutter speed