FujiFilm FinePix S100 Owner's Manual page 167

Battery NP-140
Nominal voltage DC 7.2V
Nominal capacity 1150 mAh
Operating 0°C to +40°C
temperature (+32°F to +104°F)
Dimensions 35.5 mm × 56.0 mm × 13.3 mm
(1.4 in. × 2.2 in. × 0.5 in.)(W × H × D)
Mass (Weight) Approx. 47 g (1.5 oz.)
Battery Charger BC-140
Rated input 100-240 V AC, 50/60 Hz
Input capacity 7.8 W
Rated output DC 8.4 V, 720 mA
Applicable batteries Rechargeable Battery NP-140
Charging time Approx. 2.1 hrs.
Operating 0°C to + 40°C
temperatures (+ 32°F to + 104°F)
Dimensions 68 mm × 84 mm × 28 mm
(2.7 in. × 3.3 in. × 1.1 in.) (W × H × D)
Mass (Weight) Approx. 83 g (2.7 oz.)
(not including battery)
Notes on Using the Battery Charger
• The battery and battery charger themselves will
become warm due to the power stored inside them. This
is normal and does not indicate a fault. Wherever
possible, use the battery charger in a well-ventilated
location.
• There may be vibration noises from inside the battery
charger during use. This is normal and does not indicate
a fault.
• Do not use the battery charger to charge batteries other
than rechargeable battery NP-140.
• The battery charger could cause interference if placed
close to a radio during charging. In this event, move the
radio and charger further apart.
• Do not leave the battery charger in the following types
of locations:
• Extremely humidity or high temperatures, such as
close to a heating appliance or in direct sunlight
• Places with strong vibration
• In very dusty places
• The battery charger accepts input voltages of 100-240
V AC at 50 or 60 Hz and can be used all over the world.
However, the shape of the plug and socket-outlet
depends on the country of use. Consult your travel
agent for details.
Continued Q
167