FujiFilm FinePix S100 Owner's Manual page 166

Specifications
Input/Output Terminal
A/V OUT (Audio/Visual
output)
Digital input/output
DC input socket
Power Supply and Others
Power supply
Guide to the number of
available frames for battery
operation (fully charged)
Camera dimensions (W/H/D) 133.4 mm × 93.6 mm × 150.4 mm/5.3 in. × 3.7 in. × 5.9 in. (not including accessories and attachments)
Camera mass (weight)
Weight for photography
Operating Conditions
166
NTSC/PAL-type (with monaural sound)
USB 2.0 Hi-Speed, PTP (Picture Transfer Protocol)/MTP (Media Transfer Protocol)
AC Power Adapter AC-84V (sold separately)
Use one of the following:
• Rechargeable battery NP-140 (supplied)
• AC Power Adapter AC-84V (sold separately)
Battery Type
NP-140 (1150 mAh)
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
Use the battery supplied with the camera. The storage media should be xD-Picture Card.
Pictures should be taken at a temperature of +23°C (+73°F), with the LCD monitor turned on, the optical
zoom moved from full wide-angle to full telephoto (or vice-versa) and back again to its original position
every 30 seconds, the flash used at full power every second shot and the camera turned off and then on
again once every 10 shots.
• Note: Because the number of available shots varies depending on the capacity of battery, the figures
shown here for the number of available shots using battery is not guaranteed.
The number of available shots will also decline at low temperatures.
Approx. 918 g/32 oz. (not including accessories, battery and Memory Card)
Approx. 968 g/34 oz. (including battery and Memory Card)
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
With LCD monitor ON
Approx. 250 frames
With viewfinder (EVF) ON
Approx. 250 frames