Changing The Quality Setting ([ Quality]) - FujiFilm FinePix S100 Owner's Manual

Changing the quality setting
([ QUALITY])
Use this menu to specify the image size (number of
recorded pixels).
Select the quality setting for the scene being shot.
Z Quality settings in Shooting mode
Quality mode
F (3840 × 2880) Printing at up to 10R (25.4 × 30.5 cm/
N (3840 × 2880) 10 × 12 in.) / A4 size / A3 size
For better quality, select
% (4032 × 2688)
5 (2816 × 2112)
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
3 (2048 × 1536)
2 (1600 × 1200)
Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
` (640 × 480)
To use for e-mail or web site
Sample uses
F
Area shot and quality setting
Area shot excluding %
ISO 400 ISO ISO 400 ISO 400 400
2000 2000 2000 2000 F2.8 F2.8 F2.8 F2.8
Normal shooting provides an aspect ratio of 4:3 and %
shooting provides an aspect ratio of 3:2 (same aspect ratio as
35 mm film and post card).
MEMO
• The bigger the number of recorded pixels, the better the
image quality becomes. As the number of recorded
pixels becomes smaller, you will be able to record more
frames to a Memory Card.
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• When changing the quality setting, the number of
available frames also changes (➝p.168). The numbers
to the right of setting show the number of available
frames.
• Available [S ISO] setting changes depending on the
quality setting. For the relation of ISO sensitivity and
quality, see p.74.
CAUTION
When [ CCD-RAW] is set to [ON] in the [SET-UP]
menu, [ QUALITY] cannot be set.
Setting the menu (➝p.85)
Area shot with %
ISO 400 ISO ISO 400 ISO 400 400
2000 2000 2000 2000 F2.8 F2.8 F2.8 F2.8
89