Show Ip Accounting Access-List - Dell Force10 MXL Blade Reference Manual

show ip accounting access-list

Display
Syntax show ip accounting {access-list access-list-name | cam_count} interface interface
Parameters
access-list-name
cam_count
interface interface
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Example Figure 6-3. show ip accounting access-lists Command Example
FTOS#show ip accounting access FILTER1 interface tengig 1/6
Extended IP access list FILTER1
seq 5 deny ip any 191.1.0.0 /16 count (0x00 packets)
seq 10 deny ip any 191.2.0.0 /16 order 4
seq 15 deny ip any 191.3.0.0 /16
seq 20 deny ip any 191.4.0.0 /16
seq 25 deny ip any 191.5.0.0 /16
Table 6-1
Table 6-1. show ip accounting access-lists Command Example Field
Field
"Extended IP..."
"seq 5..."
"order 4"
the IP access-lists created on the switch and the sequence of filters.
Enter the name of the ACL to be displayed.
List the count of the CAM rules for this ACL.
Enter the keyword
number information:
• For a Port Channel interface, enter the keyword
a number:
Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
• For a 40-Gigabit Ethernet interface, enter the keyword
by the slot/port information.
Introduced on MXL 10/40GbE Switch IO Module
defines the information in
interface
followed by the interface type and slot/port or
followed by the slot/port information.
Figure 6-3.
Description
Displays the name of the IP ACL.
Displays the filter. If the keywords count or byte were configured in the
filter, the number of packets or bytes processed by the filter is displayed at
the end of the line.
Displays the QoS order of priority for the ACL entry.
port-channel
followed by
fortyGigE
followed
Access Control Lists (ACL) | 97