Ip Ospf Network; Ip Ospf Priority; Ip Ospf Retransmit-Interval - Dell Force10 MXL Blade Reference Manual

ip ospf network

Set the network type for the interface.
Syntax ip ospf network { broadcast | point-to-point }
To return to the default, use the no ip ospf network command.
Parameters
broadcast
point-to-point
Defaults
Not configured.
Command Modes
INTERFACE
Command
Version 8.3.16.1
History

ip ospf priority

Set the priority of the interface to determine the Designated Router for the OSPF network.
Syntax
ip ospf priority number
To return to the default setting, use the no ip ospf priority command.
Parameters
number
Defaults
1
Command Modes INTERFACE
Command
Version 8.3.16.1
History
Usage
Setting a priority of 0 makes the router ineligible for election as a Designated Router or Backup
Information
Designated Router.
Use this command for interfaces connected to multi-access networks, not point-to-point networks.

ip ospf retransmit-interval

Set the retransmission time between lost link state advertisements (LSAs) for adjacencies belonging to
the interface.
Syntax ip ospf retransmit-interval seconds
To return to the default values, use the no ip ospf retransmit-interval command.
broadcast
Enter the keyword
network.
point-to-point
Enter the keyword
point-to-point network.
Introduced on MXL 10/40GbE Switch IO Module
Enter a number as the priority.
Range: 0 to 255.
The default is 1.
Introduced on MXL 10/40GbE Switch IO Module
to designate the interface as part of a broadcast
to designate the interface as part of a
Open Shortest Path First (OSPFv2) | 401