Logging History; Logging History Size - Dell Force10 MXL Blade Reference Manual

Command
Version 8.3.16.1
History
Related
logging
Commands
logging on

logging history

Specify which messages are logged to the history table of the switch and the SNMP network
management station (if configured).
Syntax logging history level
To return to the default values, use the no logging history command.
Parameters
level
Defaults
4 or warnings
Command Modes CONFIGURATION
Command
Version 8.3.16.1
History
Usage When you configure the
Information
table are also sent to the SNMP network management station.
Related
show logging history
Commands

logging history size

Specify the number of messages stored in the FTOS logging history table.
Syntax logging history size size
To return to the default values, use the no logging history size command.
Parameters
size
Defaults 1 message
Command Modes
CONFIGURATION
Command
Version 8.3.16.1
History
Introduced on MXL 10/40GbE Switch IO Module
Enables logging to a Syslog server.
Enables logging.
Indicate a value from 0 to 7 or enter one of the following equivalent words:
emergencies, alerts, critical, errors, warnings, notifications, informational, or
debugging.
The default is 4.
Introduced on MXL 10/40GbE Switch IO Module
snmp-server trap-source
Displays information logged to the history buffer.
Indicate a value as the number of messages to be stored.
Range: 0 to 500.
Default: 1 message.
Introduced on MXL 10/40GbE Switch IO Module
Simple Network Management Protocol (SNMP) and Syslog | 599
command, the system messages logged to the history