Parameters
Command Mode
Default
Command
History
network
Syntax
Parameters
Command Mode
Default
Command
History
show ip dhcp binding
Syntax
Command Mode
Default
Command
History
show ip dhcp configuration
Syntax
192
|
Dynamic Host Configuration Protocol (DHCP)
type
Enter the NETBIOS node type.
Broadcast: Enter the keyword b-node.
Hybrid: Enter the keyword h-node.
Mixed: Enter the keyword m-node.
Peer-to-peer: Enter the keyword p-node.
DHCP <POOL>
Hybrid
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
Specify the range of addresses in an address pool.
network network /prefix-length
network/
Specify a range of addresses.
prefix-length
Prefix-length Range: 17-31
DHCP <POOL>
none
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
Display the DHCP binding table.
show ip dhcp binding
EXEC Privilege
none
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
Display the DHCP configuration.
show ip dhcp configuration [global | pool name ]