Aaa Authentication Enable - Dell Force10 MXL Blade Reference Manual
Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs
Also See for Force10 MXL Blade:
- Configuration manual (690 pages) ,
- Deployment manual (89 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
aaa authentication enable
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
538
|
Security
Configure AAA Authentication method lists for user access to the EXEC privilege mode (the "Enable"
access).
aaa authentication enable
To return to the default setting, use the
method
[
... method2
] command.
default
method-list-name
method
... method2
Use the
enable
password.
CONFIGURATION
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
By default, the Enable password is used. If you configure
uses the methods defined for Enable access instead.
Methods configured with the
configured. If authentication fails using the primary method, FTOS employs the second method (or
third method, if necessary) automatically. For example, if the TACACS+ server is reachable, but the
server key is invalid, FTOS proceeds to the next authentication method. The TACACS+ is incorrect,
but the user is still authenticated by the secondary method.
enable password
login authentication
password
radius-server host
tacacs-server host
{
default
|
method-list-name
no aaa authentication enable
default
Enter the keyword
the default sequence of methods to be used for the Enable log-in.
default enable
Default:
Enter a text string (up to 16 characters long) to name the list of enabled
authentication methods activated at log in.
Enter one of the following methods:
enable
•
- use the password defined by the
the CONFIGURATION mode.
line
•
- use the password defined by the
mode.
none
•
- no authentication.
radius
•
- use the RADIUS server(s) configured with the
command.
tacacs+
•
- use the TACACS+ server(s) configured with the
host
command.
(OPTIONAL) In the event of a "no response" from the first method, FTOS
applies the next configured method.
aaa authentication enable
Changes the password for the
Enables AAA login authentication on terminal lines.
Creates a password.
Specifies a RADIUS server host.
Specifies a TACACS+ server host.
}
method
[
... method2
]
{
default
|
method-list-name
followed by the authentication methods to use as
enable password
password
command in the LINE
aaa authentication enable default
command are evaluated in the order they are
enable
command.
}
command in
radius-server host
tacacs-server
, FTOS
Advertisement
Table of Contents
