show ip ospf database router
Display the router (type 1) LSA information.
Syntax
show ip ospf process-id database router [ link-state-id ] [ adv-router ip-address ]
Parameters
process-id
link-state-id
adv-router
ip-address
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends
on the LSA type, and it can be one of the following:
•
the network's IP address for Type 3 LSAs or Type 5 LSAs
•
the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs
•
the default destination (0.0.0.0) for Type 5 LSAs
(OPTIONAL) Enter the keywords
information about that router.
Introduced on MXL 10/40GbE Switch IO Module
adv-router
ip-address to display only the LSA
Open Shortest Path First (OSPFv2) | 419