Clear Counters Ip Access-Group - Dell Force10 MXL Blade Reference Manual

The following commands allow you to clear, display, and assign IP ACL configurations.
•
•
•
•
•
access-class
Apply a standard ACL to a terminal line.
Syntax access-class access-list-name
Parameters
access-list-name
Defaults
Not configured.
Command Modes LINE
Command
Version 8.3.16.1
History

clear counters ip access-group

Erase all counters maintained for access lists.
clear counters ip access-group [access-list-name]
Syntax
Parameters
access-list-name
Command Modes EXEC Privilege
Command
Version 8.3.16.1
History
ip access-group
Assign an IP access list (IP ACL) to an interface.
Syntax ip access-group access-list-name { in | out } [ implicit-permit ] [ vlan vlan-id ]
Parameters
access-list-name
in
out
access-class
clear counters ip access-group
ip access-group
show ip access-lists
show ip accounting access-list
Note:
See also Commands Common to all ACL
Enter the name of a configured Standard ACL, up to 140 characters.
Introduced on MXL 10/40GbE Switch IO Module
(OPTIONAL) Enter the name of a configured access-list, up to 140 characters.
Introduced on MXL 10/40GbE Switch IO Module
Enter the name of a configured access list, up to 140 characters.
Enter the keyword
Enter the keyword
Types.
in
to apply the ACL to incoming traffic.
out
to apply the ACL to outgoing traffic.
Access Control Lists (ACL) | 95