Saving A Program - Vox Tonelab ST Owner's Manual

Modeling effect processor
Hide thumbs Also See for Tonelab ST:
Table of Contents

Advertisement

Turning the knob toward the right will increase the
amount of noise reduction.
Turning the knob all the way to the left will turn noise
reduction off; it will have no effect.
NOTE: Depending on the guitar you're using, excessively
high settings of noise reduction may cause notes to be cut off
unnaturally.
3.
When you've finished making settings, press the EXIT/
TUNE switch.
12

Saving a program

When you've come up with a sound you like, here's how to save
(write) it.
NOTE: If you switch to a different program or turn off the
power before saving, the changes you've made will be dis-
carded, and the settings will revert to their original state.
1.
Press the WRITE switch.
The program display and the UP/DOWN pedal LEDs will
blink.
2.
Press the UP or DOWN pedal to select the user program
(No.0–49) in which you want to save your settings.
When selecting the save-destination, holding down the UP
pedal and pressing the EXIT/TUNE key will increment
the program number by ten. Similarly, holding down the
DOWN pedal and pressing the EXIT/TUNE key will dec-
rement the program number by ten.
NOTE: Your settings will overwrite the program you select
here. Take care not to overwrite an important program that
you want to keep. You can't save to a preset program (No.50-
99).
HINT: If you decide to cancel the Write operation, press the
EXIT/TUNE switch. You will return to the previous mode,
and the LED will stop blinking.
3.
Press the WRITE switch once again.
Your settings will be written to the user program you
selected in step 2, and the UP/DOWN LED will return to
the steadily lit state.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents